Horizontal Earth Boring Tool (NEW) w/ 1", 2", & 3" Bits (NO CASE)

NEW HORIZONTAL EARTH BORING KITAS THE SELLER WE WILL WARRANTY ANY ISSUES WITH THIS TOOLTOOL COMES WITH 1", 2", & 3" BITSFOR MODERN PIPE INSTALLATIONWATER LINES • GAS LINES • SEWERS • DRAINAGE • UNDERGROUND CONDUITS • SPRINKLER SYSTEMSFAST...EASY...ECONOMICAL...and CLEANNo more digging drudgery. This tool eliminates trenching, tunneling backfiling, surface repair, and unsightly damage to lawns and shrubs, trees, walks. streets. tI pays for itself on one job!• Rugged Construction • Precision Design• Target Accuracy • O n e Man Operation• Every Part Replaceable Tool Kit, has NEW 1", 2", & 3" Bits w/ 1/2"-3/4" Coupling - Colors May Vary - Some Industrial Drills with a true 1/2" Jacobs chuck or your best option is a 3/4″ DrillHow to use your BORING SYSTEM What you will need:A HEAVY DUTY INDUSTRIAL DRILL - While a 1/2" Industrial Drill with a Jacobs Chuck will work, We Recommend a full 3/4” Chuck or larger chuck which turns at a constant 300-450 rpm. Most of these drills are rated at 6 to 8 amps or more. WE RECOMMEND A 3/4" AS THEY ARE READILY AVAILABLE.HEAVY DUTY EXTENSION CORD WITH GFCI RECEPTACLE to avoid any possibility of electric shock.For DRILL PIPE we recommend 3/4” schedule 40 galvanized or black steel water pipe, cut and threaded into 3’ to 10’ joints depending on your drilling conditions. IT IS NOT RECOMMENDED TO USE PVC or thin walled metal pipe, as it WILL shear off, leaving your bit in the hole. For the best results Do Not Use 1/2" Pipe, use the recommended 3/4” schedule 40 galvanized or black steel water pipe.A GARDEN HOSE provides water to lubricate the bit and soften soil ahead of the bit. If a hose is unavailable you can use a container large enough to hold the water needed and raise the container so you can gravity feed water thru the tool while doing your bore. Water is needed to help soften the soil so the bit can compact the dirt as you bore thru the soil.A TORPEDO LEVEL is helpful to ensure that the bore is straight. If you keep the drill pipe level for the first 2 or 3 feet of the bore, the hole will remain true; after that, the only way to change the direction is to pull out and start over.BEFORE YOU START: Break in the Tool & make sure the end cap screws remain tightened to prevent water leakage. ((You May Need To Use LOC-TITE on the Cap Screws)) Connect a water hose to the Boring Tool, attaching the drill chuck to the hex and slowly opening the gate valve to make sure there are no leaks and the tool operates smoothly. MANUFACTURERS OF THIS TOOL OR SIMILAR:BORIT - THE ORIGINAL HAND-HELD EARTH BORING TOOLBORZIT - THE AFFORDABLE UNDERGROUND BORING SOLUTIONWHEELER REX EARTHWORM - HYDRO DRILL - THE HARDEST WORKING PIPE TOOLS BORIT MANUFACTURING - HORIZONTAL EARTH BORING TOOLBORZIT SYSTEMS - HORIZONTAL EARTH BORING TOOLWHEELER REX – Earthworm Horizontal Earth Boring ToolUnderground Boring Equipment - PORTAMOLE